news

The advantages of microfiber clean cloth

Update:28-12-2020
Summary:

Microfiber clean cloth is a kind of differentiated fibe […]

Microfiber clean cloth is a kind of differentiated fiber that is developing rapidly in modern times. It is called a new generation of synthetic fiber. It is a high-quality, high-tech textile raw material, and it is a chemical fiber that is in the direction of high technology and high simulation. A typical representative of the development of new synthetic fibers. Due to the small diameter of the fiber, its bending stiffness is very small and the hand feels very soft.

The specific surface area of ​​the fiber is large, so the coverage, bulkiness and warmth retention of the fiber fabric are significantly improved. The fiber with a large specific surface area has more times of contact with dust or oil, and there are more opportunities for oil to penetrate through the gap between the fiber surface. Therefore, it has a strong cleaning function.
The fiber is made into an ultra-high-density fabric, and the gap between the fibers is between the diameter of the water droplet and the diameter of the water vapor droplet, so the fabric has a waterproof and vapor-permeable effect.

Precautions for the use of microfiber clean cloth:
⒈The surface is strictly prohibited from contacting acid and alkaline solvents (such as benzene, alcohol, etc.), this may cause the product surface to discolor, fade and decline in resistance. If cleaning is needed, wipe the cloth with a neutral solution (such as water, etc.).

⒉The glue used should not only be compatible with the bottom of the pad product but also with the material of the workbench, it is not only firmly bonded, but also does not shrink after the product is stuck.

3. Product shrinkage: The rubber content of the product is higher than that of the general table, the durability is increased, and the tensile strength is increased accordingly. It is recommended that the product specifications be lengthened and relaxed when cutting, and stored for 24 hours at the same time, so that the product has a fatigue recovery process. Carry out glue bonding production.

0
Views: 800